UltraGrid Biaxial geogrids provide excellent ground stabilisation and reinforcement for a wide variety of civil engineering and construction projects. Through the interlock mechanism, UltraGrid geogrids are specifically designed to control the movement of aggregate materials. Using an UltraGrid geogrid as part of a civil engineering or construction project results in a significant reduction to the quantity of required fill material, as geogrids can increase the bearing capacity of the underlying ground offering enhanced performance and cost benefits to the overall project. Product Features • The high strength and with low elongation provides effective ground reinforcement • The aperture design of UltraGrid geogrids enables aggregate materials to interlock and encourages load dispersal • Geogrids are manufactured under ISO Quality Management and the Construction Products Regulation • Large Aperture Grid available Benefits • Excellent Soil & Aggregate Confinement • High Tensile Strength • High-performance Reinforcement • Cost Effective Design Component, Application Design Service Avaliable BIAXIAL GEOGRIDS E: technicalsales@civilsstore.co.uk T: 01749 823 057 www.civilsstore.co.uk UP TO 100 YEAR DESIGN LIFE
All products aremanufactured under BS EN ISO 9001. Notes & Declaration Pleasenotethat theproduct is tobecoveredwithin1monthof installation. TheUltraGridrangeofgeogridsarepredictedto bedurableformorethan100yearsinsoiltemperatures≤25oandhaveacarbonblackcontentof≥2%.TheUltraGridrangeof geogridsareresistanttohighlyacidandalkalineenvironmentsonthebasisofadurabilityassessment.Duetomanufacturing and transportation circumstances, please note that the widths of UltraGrid geogrids have a tolerance of (+0.0/-0.1). In regard to dangerous substances, UltraGrid geogrids contain less than required by national regulations in EU member states. UltraGrid reserves the right to change specifications or other product information. UltraGrid accepts no responsibility or liability for information provided by third parties. No warranties, express or implied, are offered regarding the suitability of any product for your use, as site conditions and customer requirements vary. Should you require further information, please contact us. Products are sold subject to the seller’s terms and conditions of sale. No warranty or immunity is offered against infringement of patents or other intellectual property rights. ©UltraGrid Limited, 2024. The intellectual property in the products is owned and protected by UltraGrid or its licensors. TEST STANDARD Product 20/20S 30/30S 40/40S 30/30L Tensile Strength (kN/m) EN 10319 MD 20 30 40 30 CD 20 30 40 30 Tensile Strength at 2% strain (%) EN 10319 MD 7 12 15 10 CD 7 12 15 9 Tensile Strength at 5% strain (%) EN 10319 MD 14 22 30 21 CD 14 22 30 20 Elongation at max load (%) EN 10319 MD 15 12 9 12 CD 11 12 10 9 Grid Opening Size (mm) 36 x 36 36 x 36 36 x 36 60 x 60 Effect of UV Light The polypropylene (PP) used contains a UV inhibitor Roll Size (m) 3.95 x 50 3.95 x 50 3.95 x 50 3.95 x 50 BIAXIAL GEOGRIDS: TECHNICAL DATA SHEET E: technicalsales@civilsstore.co.uk T: 01749 823 057 www.civilsstore.co.uk
E: technicalsales@civilsstore.co.uk T: 01749 823 057 www.civilsstore.co.uk APPLICATION DESIGN SERVICE APPLICATION - WORKING PLATFORM PROJECT REF (Internal) PROJECT DETAILS Date: Name: Job Title: Company: Scheme Name: Scheme Address: Site Postcode: Will you require a formal PI Design?* Project Stage: (concept / Pre Construction / Tender / On Site) Drawings Available? (If so please send via email or WeTransfer) SI Available? (If so please send via email or WeTransfer) YES NO YES NO Additional Project Information / Details * please note that we will send you a quotation for the cost a formal PI design is required CALCULATION REQUIREMENTS Subgrade Soil Type: Area (m2): Subgrade CBR (sg) %: WPMaterial Density (kN/m3): Phi Angle of Working Platform (Degrees): TrackWidth (m): Track Length (m): Tracker Vehicle Type (Name &Model) Additional Project Information / Details Load Case 1 (kPa): Load Case 2 (kPa): Subgrade Un-drained Shear Strength Cu (kPa):
E: technicalsales@civilsstore.co.uk T: 01749 823 057 www.civilsstore.co.uk APPLICATION DESIGN SERVICE APPLICATION - ACCESS ROAD PROJECT REF (Internal) Additional Project Information / Details * please note that we will send you a quotation for the cost a formal PI design is required CALCULATION REQUIREMENTS Subgrade Soil Type: Area (m2): Subgrade CBR (sg) %: Final Base Course CBR (Years): Subgrade Soil Description: Tyre Contact Pressure (kPa): MaximumAxle Load: Additional Project Information / Details Number of ESA Passes: PROJECT DETAILS Date: Name: Job Title: Company: Scheme Name: Scheme Address: Site Postcode: Will you require a formal PI Design?* Project Stage: (concept / Pre Construction / Tender / On Site) Drawings Available? (If so please send via email or WeTransfer) SI Available? (If so please send via email or WeTransfer) YES NO YES NO Subgrade Un-drained Shear Strength Cu (kPa): Design Period (Years): Allowable Rut Depth: (We allow for 75mmunless otherwise stated)
RkJQdWJsaXNoZXIy NTc5NzI=